dellemc.enterprise_sonic.sonic_l3_acls module – Manage Layer 3 access control lists (ACL) configurations on SONiC

Note

This module is part of the dellemc.enterprise_sonic collection (version 2.5.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install dellemc.enterprise_sonic.

To use it in a playbook, specify: dellemc.enterprise_sonic.sonic_l3_acls.

New in dellemc.enterprise_sonic 2.1.0

Synopsis

  • This module provides configuration management of Layer 3 access control lists (ACL) in devices running SONiC.

Parameters

Parameter

Comments

config

list / elements=dictionary

Specifies Layer 3 ACL configurations.

acls

list / elements=dictionary

List of ACL configuration for the given address family.

name

string / required

Specifies the ACL name.

remark

string

Specifies remark for the ACL.

rules

list / elements=dictionary

List of rules with the ACL.

sequence_num, action, protocol, source & destination are required for adding a new rule.

If state=deleted, options other than sequence_num are not considered.

action

string

Specifies the action taken on the matched packet.

Choices:

  • "deny"
  • "discard"
  • "do-not-nat"
  • "permit"
  • "transit"

destination

dictionary

Specifies the destination of the packet.

any, host and prefix are mutually exclusive.

any

boolean

Match any destination network address.

Choices:

  • false
  • true

host

string

Network address of a single destination host.

port_number

dictionary

Specifies the destination port (valid only for TCP or UDP)

Only one suboption can be specified for port_number in a rule.

eq

integer

Match packets with destination port equal to the given port number.

The range is from 0 to 65535.

gt

integer

Match packets with destination port greater than the given port number.

The range is from 0 to 65534.

lt

integer

Match packets with destination port lesser than the given port number.

The range is from 1 to 65535.

range

dictionary

Match packets with destination port in the given range.

begin and end are required together.

begin

integer

Specifies the beginning of the port range.

The range is from 0 to 65534.

end

integer

Specifies the end of the port range.

The range is from 1 to 65535.

prefix

string

Destination network prefix in the format A.B.C.D/mask (ipv4) or A::B/mask (ipv6).

dscp

dictionary

Match packets using DSCP value.

Only one suboption can be specified for dscp in a rule.

af11

boolean

Match packets with AF11 DSCP (001010 - Decimal value 10).

Choices:

  • false
  • true

af12

boolean

Match packets with AF12 DSCP (001100 - Decimal value 12).

Choices:

  • false
  • true

af13

boolean

Match packets with AF13 DSCP (001110 - Decimal value 14).

Choices:

  • false
  • true

af21

boolean

Match packets with AF21 DSCP (010010 - Decimal value 18).

Choices:

  • false
  • true

af22

boolean

Match packets with AF22 DSCP (010100 - Decimal value 20).

Choices:

  • false
  • true

af23

boolean

Match packets with AF23 DSCP (010110 - Decimal value 22).

Choices:

  • false
  • true

af31

boolean

Match packets with AF31 DSCP (011010 - Decimal value 26).

Choices:

  • false
  • true

af32

boolean

Match packets with AF32 DSCP (011100 - Decimal value 28).

Choices:

  • false
  • true

af33

boolean

Match packets with AF33 DSCP (011110 - Decimal value 30).

Choices:

  • false
  • true

af41

boolean

Match packets with AF41 DSCP (100010 - Decimal value 34).

Choices:

  • false
  • true

af42

boolean

Match packets with AF42 DSCP (100100 - Decimal value 36).

Choices:

  • false
  • true

af43

boolean

Match packets with AF43 DSCP (100110 - Decimal value 38).

Choices:

  • false
  • true

cs1

boolean

Match packets with CS1 DSCP (001000 - Decimal value 8).

Choices:

  • false
  • true

cs2

boolean

Match packets with CS2 DSCP (010000 - Decimal value 16).

Choices:

  • false
  • true

cs3

boolean

Match packets with CS3 DSCP (011000 - Decimal value 24).

Choices:

  • false
  • true

cs4

boolean

Match packets with CS4 DSCP (100000 - Decimal value 32).

Choices:

  • false
  • true

cs5

boolean

Match packets with CS5 DSCP (101000 - Decimal value 40).

Choices:

  • false
  • true

cs6

boolean

Match packets with CS6 DSCP (110000 - Decimal value 48).

Choices:

  • false
  • true

cs7

boolean

Match packets with CS7 DSCP (111000 - Decimal value 56).

Choices:

  • false
  • true

default

boolean

Match packets with CS0 DSCP (000000 - Decimal value 0).

Choices:

  • false
  • true

ef

boolean

Match packets with EF DSCP (101110 - Decimal value 46).

Choices:

  • false
  • true

value

integer

Match packets with given DSCP value.

The range is from 0 to 63.

voice_admit

boolean

Match packets with VOICE-ADMIT DSCP (101100 - Decimal value 44).

Choices:

  • false
  • true

protocol

dictionary

Specifies the protocol to match.

Only one suboption can be specified for protocol in a rule.

name

string

Match packets with the given protocol.

ip - Match any IPv4 packets.

ipv6 - Match any IPv6 packets.

icmp - Match ICMP packets.

icmpv6 - Match ICMPv6 packets.

tcp - Match TCP packets.

udp - Match UDP packets.

ip and icmp are valid only for IPv4 ACLs.

ipv6 and icmpv6 are valid only for IPv6 ACLs.

Choices:

  • "ip"
  • "ipv6"
  • "icmp"
  • "icmpv6"
  • "tcp"
  • "udp"

number

integer

Match packets with given protocol number.

The range is from 0 to 255.

protocol_options

dictionary

Specifies the additional packet match options for the chosen protocol.

icmp, icmpv6 and tcp are mutually exclusive.

icmp

dictionary

Packet match options for ICMP.

code

integer

Match packets with given ICMP code.

The range is from 0 to 255.

type

integer

Match packets with given ICMP type.

The range is from 0 to 255.

icmpv6

dictionary

Packet match options for ICMPv6.

code

integer

Match packets with given ICMPv6 code.

The range is from 0 to 255.

type

integer

Match packets with given ICMPv6 type.

The range is from 0 to 255.

tcp

dictionary

Packet match options for TCP.

established and other TCP flag options are mutually exclusive.

ack

boolean

Match packets with ACK flag set.

Choices:

  • false
  • true

established

boolean

Match packets which are part of established TCP session.

Choices:

  • false
  • true

fin

boolean

Match packets with FIN flag set.

Choices:

  • false
  • true

not_ack

boolean

Match packets with ACK flag cleared.

Choices:

  • false
  • true

not_fin

boolean

Match packets with FIN flag cleared.

Choices:

  • false
  • true

not_psh

boolean

Match packets with PSH flag cleared.

Choices:

  • false
  • true

not_rst

boolean

Match packets with RST flag cleared.

Choices:

  • false
  • true

not_syn

boolean

Match packets with SYN flag cleared.

Choices:

  • false
  • true

not_urg

boolean

Match packets with URG flag cleared.

Choices:

  • false
  • true

psh

boolean

Match packets with PSH flag set.

Choices:

  • false
  • true

rst

boolean

Match packets with RST flag set.

Choices:

  • false
  • true

syn

boolean

Match packets with SYN flag set.

Choices:

  • false
  • true

urg

boolean

Match packets with URG flag set.

Choices:

  • false
  • true

remark

string

Specifies remark for the ACL rule.

sequence_num

integer / required

Specifies the sequence number of the rule.

The range is from 1 to 65535.

source

dictionary

Specifies the source of the packet.

any, host and prefix are mutually exclusive.

any

boolean

Match any source network address.

Choices:

  • false
  • true

host

string

Network address of a single source host.

port_number

dictionary

Specifies the source port (valid only for TCP or UDP)

Only one suboption can be specified for port_number in a rule.

eq

integer

Match packets with source port equal to the given port number.

The range is from 0 to 65535.

gt

integer

Match packets with source port greater than the given port number.

The range is from 0 to 65534.

lt

integer

Match packets with source port lesser than the given port number.

The range is from 1 to 65535.

range

dictionary

Match packets with source port in the given range.

begin and end are required together.

begin

integer

Specifies the beginning of the port range.

The range is from 0 to 65534.

end

integer

Specifies the end of the port range.

The range is from 1 to 65535.

prefix

string

Source network prefix in the format A.B.C.D/mask (ipv4) or A::B/mask (ipv6).

vlan_id

integer

Match packets with the given VLAN ID value.

address_family

string / required

Specifies the address family of the ACLs.

Choices:

  • "ipv4"
  • "ipv6"

state

string

The state of the configuration after module completion.

merged - Merges provided L3 ACL configuration with on-device configuration.

replaced - Replaces on-device configuration of the specified L3 ACLs with provided configuration.

overridden - Overrides all on-device L3 ACL configurations with the provided configuration.

deleted - Deletes on-device L3 ACL configuration.

Choices:

  • "merged" ← (default)
  • "replaced"
  • "overridden"
  • "deleted"

Notes

Note

  • Supports check_mode.

Examples

# Using merged
#
# Before State:
# -------------
#
# sonic# show running-configuration ip access-list
# !
# ip access-list test
#  seq 1 permit ip host 192.168.1.2 any
# sonic#
# sonic# show running-configuration ipv6 access-list
# !
# ipv6 access-list testv6
#  seq 1 permit ipv6 host 192:168:1::2 any
# sonic#

  - name: Merge provided Layer 3 ACL configurations
    dellemc.enterprise_sonic.sonic_l3_acls:
      config:
        - address_family: 'ipv4'
          acls:
          - name: 'test'
            rules:
            - sequence_num: 2
              action: 'permit'
              protocol:
                name: 'icmp'
              source:
                any: true
              destination:
                host: '192.168.1.2'
              protocol_options:
                icmp:
                  type: 8
            - sequence_num: 3
              action: 'deny'
              protocol:
                number: 2
              source:
                any: true
              destination:
                any: true
            - sequence_num: 4
              action: 'deny'
              protocol:
                name: 'ip'
              source:
                any: true
              destination:
                any: true
              vlan_id: 10
              remark: 'Vlan10'
          - name: 'test1'
            remark: 'test_ip_acl'
            rules:
            - sequence_num: 1
              action: 'permit'
              protocol:
                name: 'tcp'
              source:
                prefix: '10.0.0.0/8'
              destination:
                any: true
            - sequence_num: 2
              action: 'deny'
              protocol:
                name: 'udp'
              source:
                any: true
              destination:
                prefix: '20.1.0.0/16'
                port_number:
                  gt: 1024
            - sequence_num: 3
              action: 'deny'
              protocol:
                name: 'ip'
              source:
                any: true
              destination:
                any: true
              dscp:
                value: 63
        - address_family: 'ipv6'
          acls:
          - name: 'testv6'
            rules:
            - sequence_num: 2
              action: 'deny'
              protocol:
                name: 'icmpv6'
              source:
                any: true
              destination:
                any: true
          - name: 'testv6-1'
            remark: 'test_ipv6_acl'
            rules:
            - sequence_num: 1
              action: 'permit'
              protocol:
                name: 'ipv6'
              source:
                prefix: '1000::/16'
              destination:
                any: true
              dscp:
                af22: true
            - sequence_num: 2
              action: 'deny'
              protocol:
                name: 'tcp'
              source:
                any: true
              destination:
                prefix: '2000::1000:0/112'
                port_number:
                  range:
                    begin: 100
                    end: 1000
            - sequence_num: 3
              action: 'permit'
              protocol:
                name: 'tcp'
              source:
                any: true
              destination:
                any: true
              protocol_options:
                tcp:
                  established: true
            - sequence_num: 4
              action: 'deny'
              protocol:
                name: 'udp'
              source:
                any: true
                port_number:
                  eq: 3000
              destination:
                any: true
      state: merged

# After State:
# ------------
#
# sonic# show running-configuration ip access-list
# !
# ip access-list test
#  seq 1 permit ip host 192.168.1.2 any
#  seq 2 permit icmp any host 192.168.1.2 type 8
#  seq 3 deny 2 any any
#  seq 4 deny ip any any vlan 10 remark Vlan10
# !
# ip access-list test1
#  remark test_ip_acl
#  seq 1 permit tcp 10.0.0.0/8 any
#  seq 2 deny udp any 20.1.0.0/16 gt 1024
#  seq 3 deny ip any any dscp 63
# sonic#
# sonic# show running-configuration ipv6 access-list
# !
# ipv6 access-list testv6
#  seq 1 permit ipv6 host 192:168:1::2 any
#  seq 2 deny icmpv6 any any
# !
# ipv6 access-list testv6-1
#  remark test_ipv6_acl
#  seq 1 permit ipv6 1000::/16 any dscp af22
#  seq 2 deny tcp any 2000::1000:0/112 range 100 1000
#  seq 3 permit tcp any any established
#  seq 4 deny udp any eq 3000 any
# sonic#


# Using replaced
#
# Before State:
# -------------
#
# sonic# show running-configuration ip access-list
# !
# ip access-list test
#  seq 1 permit ip host 192.168.1.2 any
#  seq 2 permit icmp any host 192.168.1.2 type 8
#  seq 3 deny 2 any any
#  seq 4 deny ip any any vlan 10 remark Vlan10
# !
# ip access-list test1
#  remark test_ip_acl
#  seq 1 permit tcp 10.0.0.0/8 any
#  seq 2 deny udp any 20.1.0.0/16 gt 1024
#  seq 3 deny ip any any dscp 63
# sonic#
# sonic# show running-configuration ipv6 access-list
# !
# ipv6 access-list testv6
#  seq 1 permit tcp host 3000::1 any established
#  seq 2 permit udp any any
#  seq 3 deny icmpv6 any any
# !
# ipv6 access-list testv6-1
#  remark test_ipv6_acl
#  seq 1 permit ipv6 1000::/16 any dscp af22
#  seq 2 deny tcp any 2000::1000:0/112 range 100 1000
#  seq 3 permit tcp any any established
#  seq 4 deny udp any eq 3000 any
# sonic#

  - name: Replace device configuration of specified Layer 3 ACLs with provided configuration
    dellemc.enterprise_sonic.sonic_l3_acls:
      config:
        - address_family: 'ipv4'
          acls:
          - name: 'test2'
            rules:
            - sequence_num: 1
              action: 'permit'
              protocol:
                name: 'tcp'
              source:
                prefix: '192.168.1.0/24'
              destination:
                any: true
        - address_family: 'ipv6'
          acls:
          - name: 'testv6'
            rules:
            - sequence_num: 1
              action: 'permit'
              protocol:
                name: 'tcp'
              source:
                host: '3000::1'
              destination:
                any: true
              protocol_options:
                tcp:
                  ack: true
                  syn: true
                  fin: true
            - sequence_num: 2
              action: 'deny'
              protocol:
                name: 'ipv6'
              source:
                any: true
              destination:
                any: true
      state: replaced

# After State:
# ------------
#
# sonic# show running-configuration ip access-list
# !
# ip access-list test
#  seq 1 permit ip host 192.168.1.2 any
#  seq 2 permit icmp any host 192.168.1.3 type 8
#  seq 3 deny 2 any any
#  seq 4 deny ip any any vlan 10 remark Vlan10
# !
# ip access-list test1
#  remark test_ip_acl
#  seq 1 permit tcp 10.0.0.0/8 any
#  seq 2 deny udp any 20.1.0.0/16 gt 1024
#  seq 3 deny ip any any dscp 63
# !
# ip access-list test2
#  seq 1 permit tcp 192.168.1.0/24 any
# sonic#
# sonic# show running-configuration ipv6 access-list
# !
# ipv6 access-list testv6
#  seq 1 permit tcp host 3000::1 any fin syn ack
#  seq 2 deny ipv6 any any
# !
# ipv6 access-list testv6-1
#  remark test_ipv6_acl
#  seq 1 permit ipv6 1000::/16 any dscp af22
#  seq 2 deny tcp any 2000::1000:0/112 range 100 1000
#  seq 3 permit tcp any any established
#  seq 4 deny udp any eq 3000 any
# sonic#


# Using overridden
#
# Before State:
# -------------
#
# sonic# show running-configuration ip access-list
# !
# ip access-list test
#  seq 1 permit ip host 192.168.1.2 any
#  seq 2 permit icmp any host 192.168.1.3 type 8
#  seq 3 deny 2 any any
#  seq 4 deny ip any any vlan 10 remark Vlan10
# !
# ip access-list test1
#  remark test_ip_acl
#  seq 1 permit tcp 10.0.0.0/8 any
#  seq 2 deny udp any 20.1.0.0/16 gt 1024
#  seq 3 deny ip any any dscp 63
# !
# ip access-list test2
#  seq 1 permit tcp 192.168.1.0/24 any
# sonic#
# sonic# show running-configuration ipv6 access-list
# !
# ipv6 access-list testv6
#  seq 1 permit tcp 3000::/16 any
#  seq 2 deny ipv6 any any
# !
# ipv6 access-list testv6-1
#  remark test_ipv6_acl
#  seq 1 permit ipv6 1000::/16 any dscp af22
#  seq 2 deny tcp any 2000::1000:0/112 range 100 1000
#  seq 3 permit tcp any any established
#  seq 4 deny udp any eq 3000 any
# sonic#

  - name: Override device configuration of all Layer 3 ACLs with provided configuration
    dellemc.enterprise_sonic.sonic_l3_acls:
      config:
        - address_family: 'ipv4'
          acls:
          - name: 'test_acl'
            rules:
            - sequence_num: 1
              action: 'permit'
              protocol:
                name: 'ip'
              source:
                prefix: '100.1.1.0/24'
              destination:
                prefix: '100.1.2.0/24'
            - sequence_num: 2
              action: 'deny'
              protocol:
                name: 'udp'
              source:
                any: true
              destination:
                any: true
      state: overridden

# After State:
# ------------
#
# sonic# show running-configuration ip access-list
# !
# ip access-list test_acl
#  seq 1 permit ip 100.1.1.0/24 100.1.2.0/24
#  seq 2 deny udp any any
# sonic#
# sonic# show running-configuration ipv6 access-list
# sonic#


# Using deleted
#
# Before State:
# -------------
#
# sonic# show running-configuration ip access-list
# !
# ip access-list test
#  seq 1 permit ip host 192.168.1.2 any
#  seq 2 permit icmp any host 192.168.1.3 type 8
#  seq 3 deny 2 any any
#  seq 4 deny ip any any vlan 10 remark Vlan10
# !
# ip access-list test1
#  remark test_ip_acl
#  seq 1 permit tcp 10.0.0.0/8 any
#  seq 2 deny udp any 20.1.0.0/16 gt 1024
#  seq 3 deny ip any any dscp 63
# !
# ip access-list test2
#  seq 1 permit tcp 192.168.1.0/24 any
# sonic#
# sonic# show running-configuration ipv6 access-list
# !
# ipv6 access-list testv6
#  seq 1 permit tcp 3000::/16 any
#  seq 2 deny ipv6 any any
# !
# ipv6 access-list testv6-1
#  remark test_ipv6_acl
#  seq 1 permit ipv6 1000::/16 any dscp af22
#  seq 2 deny tcp any 2000::1000:0/112 range 100 1000
#  seq 3 permit tcp any any established
#  seq 4 deny udp any eq 3000 any
# sonic#

  - name: Delete specified Layer 3 ACLs, ACL remark and ACL rule entries
    dellemc.enterprise_sonic.sonic_l3_acls:
      config:
        - address_family: 'ipv4'
          acls:
          - name: 'test'
            rules:
              - sequence_num: 2
          - name: 'test2'
        - address_family: 'ipv6'
          acls:
          - name: 'testv6-1'
            remark: 'test_ipv6_acl'
            rules:
              - sequence_num: 3
      state: deleted

# After State:
# ------------
#
# sonic# show running-configuration ip access-list
# !
# ip access-list test
#  seq 1 permit ip host 192.168.1.2 any
#  seq 3 deny 2 any any
#  seq 4 deny ip any any vlan 10 remark Vlan10
# !
# ip access-list test1
#  remark test_ip_acl
#  seq 1 permit tcp 10.0.0.0/8 any
#  seq 2 deny udp any 20.1.0.0/16 gt 1024
#  seq 3 deny ip any any dscp 63
# sonic#
# sonic# show running-configuration ipv6 access-list
# !
# ipv6 access-list testv6
#  seq 1 permit tcp 3000::/16 any
#  seq 2 deny ipv6 any any
# !
# ipv6 access-list testv6-1
#  seq 1 permit ipv6 1000::/16 any dscp af22
#  seq 2 deny tcp any 2000::1000:0/112 range 100 1000
#  seq 4 deny udp any eq 3000 any
# sonic#


# Using deleted
#
# Before State:
# -------------
#
# sonic# show running-configuration ip access-list
# !
# ip access-list test
#  seq 1 permit ip host 192.168.1.2 any
#  seq 2 permit icmp any host 192.168.1.3 type 8
#  seq 3 deny 2 any any
#  seq 4 deny ip any any vlan 10 remark Vlan10
# !
# ip access-list test1
#  remark test_ip_acl
#  seq 1 permit tcp 10.0.0.0/8 any
#  seq 2 deny udp any 20.1.0.0/16 gt 1024
#  seq 3 deny ip any any dscp 63
# !
# ip access-list test2
#  seq 1 permit tcp 192.168.1.0/24 any
# sonic#
# sonic# show running-configuration ipv6 access-list
# !
# ipv6 access-list testv6
#  seq 1 permit tcp 3000::/16 any
#  seq 2 deny ipv6 any any
# !
# ipv6 access-list testv6-1
#  remark test_ipv6_acl
#  seq 1 permit ipv6 1000::/16 any dscp af22
#  seq 2 deny tcp any 2000::1000:0/112 range 100 1000
#  seq 3 permit tcp any any established
#  seq 4 deny udp any eq 3000 any
# sonic#

  - name: Delete all Layer 3 ACLs for an address-family
    dellemc.enterprise_sonic.sonic_l3_acls:
      config:
        - address_family: 'ipv4'
      state: deleted

# After State:
# ------------
#
# sonic# show running-configuration ip access-list
# sonic#
# sonic# show running-configuration ipv6 access-list
# !
# ipv6 access-list testv6
#  seq 1 permit tcp 3000::/16 any
#  seq 2 deny ipv6 any any
# !
# ipv6 access-list testv6-1
#  remark test_ipv6_acl
#  seq 1 permit ipv6 1000::/16 any dscp af22
#  seq 2 deny tcp any 2000::1000:0/112 range 100 1000
#  seq 3 permit tcp any any established
#  seq 4 deny udp any eq 3000 any
# sonic#


# Using deleted
#
# Before State:
# -------------
#
# sonic# show running-configuration ip access-list
# !
# ip access-list test
#  seq 1 permit ip host 192.168.1.2 any
#  seq 2 permit icmp any host 192.168.1.3 type 8
#  seq 3 deny 2 any any
#  seq 4 deny ip any any vlan 10 remark Vlan10
# !
# ip access-list test1
#  remark test_ip_acl
#  seq 1 permit tcp 10.0.0.0/8 any
#  seq 2 deny udp any 20.1.0.0/16 gt 1024
#  seq 3 deny ip any any dscp 63
# !
# ip access-list test2
#  seq 1 permit tcp 192.168.1.0/24 any
# sonic#
# sonic# show running-configuration ipv6 access-list
# !
# ipv6 access-list testv6
#  seq 1 permit tcp 3000::/16 any
#  seq 2 deny ipv6 any any
# !
# ipv6 access-list testv6-1
#  remark test_ipv6_acl
#  seq 1 permit ipv6 1000::/16 any dscp af22
#  seq 2 deny tcp any 2000::1000:0/112 range 100 1000
#  seq 3 permit tcp any any established
#  seq 4 deny udp any eq 3000 any
# sonic#

  - name: Delete all Layer 3 ACL configurations
    dellemc.enterprise_sonic.sonic_l3_acls:
      config:
      state: deleted

# After State:
# ------------
#
# sonic# show running-configuration ip access-list
# sonic#
# sonic# show running-configuration ipv6 access-list
# sonic#

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

after

list / elements=string

The resulting configuration module invocation.

Returned: when changed

Sample: ["The configuration returned will always be in the same format as the parameters above.\n"]

after(generated)

list / elements=string

The generated configuration module invocation.

Returned: when check_mode

Sample: ["The configuration returned will always be in the same format as the parameters above.\n"]

before

list / elements=string

The configuration prior to the module invocation.

Returned: always

Sample: ["The configuration returned will always be in the same format as the parameters above.\n"]

commands

list / elements=string

The set of commands pushed to the remote device.

Returned: always

Sample: ["command 1", "command 2", "command 3"]

Authors

  • Arun Saravanan Balachandran (@ArunSaravananBalachandran)

© 2012–2018 Michael DeHaan
© 2018–2024 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/dellemc/enterprise_sonic/sonic_l3_acls_module.html